Issue dossier
The older README names LEDs, resistors, a 2×3 header, and cathode orientation, but does not publish a final 2026 schematic/BOM, operating voltage/current, supply source, SAO pinout/revision, LED forward/current values, resistor rationale, power budget, host compatibility, ESD/short protection, assembly/tools/inspection procedure, test measurements, thermal behavior, compliance, or safe installation/removal guidance.
A linkable camp-impact record with badge context, severity, evidence confidence, and source notes.
Back to issues index
hardware, power, connector, and electrical-safety documentation gap · historical BOM/assembly notes only · older component list published; operating limits unreported
The record documents a real LED SAO design trail without presenting either the old or planned re-release as electrically characterized, safe for every host, mechanically compatible, or suitable for unsupervised modification.
- Badge
- NilbinSec Power Glove Re-release SAO (DEF CON 34)
- Category
- hardware, power, connector, and electrical-safety documentation gap
- Severity
- note
- Confidence
- historical BOM/assembly notes only
- Status
- older component list published; operating limits unreported
- Timeframe
- current source pass
- Source note
- NilbinSec DC32 Power Glove README and Gerber directory.
NilbinSec historical project repository
Maker-owned DC32-named repository whose README and Gerber tree preserve a fabrication/assembly trail for a Power Glove SAO. It does not establish that its design, components, media, or documentation exactly match a future 2026 re-release.
Badge: NilbinSec Power Glove Re-release SAO (DEF CON 34)
historical maker fabrication and assembly notes
Primary historical maker documentation for the resistor/LED/header BOM, solder-mask/finish recommendations, assembly cathode orientation, and embedded images. It has no explicit repository licence or 2026 revision/fulfillment statement.
Badge: NilbinSec Power Glove Re-release SAO (DEF CON 34)
historical public PCB fabrication files
Public historical Gerber directory for the DC32 Power Glove project. It supports a real design-file trail, not a 2026 final-board, component, safety, production, or reuse-rights claim.
Badge: NilbinSec Power Glove Re-release SAO (DEF CON 34)
public maker self-submission roster
NilbinSec's public current-event row for the Power Glove Re-release SAO: marked free, 500-unit giveaway claim, social-media/Badgelife-Village drop wording, and planned GitHub posting on DEF CON Day 1. It is a maker self-submission, not an official DEF CON issuance, production, distribution, or image-rights source.
Badge: NilbinSec Power Glove Re-release SAO (DEF CON 34)
GitHub / NilbinSec · retrieved 2026-05-15
Primary historical source for the two 470-ohm 0805 resistors, three 0807 flashing RGB LEDs, one 5 mm cloudy red LED, 2×3 shrouded SAO header, assembly orientations, and fabrication recommendations. It does not identify a controller, firmware, voltage/current specifications, 2026 components, or a licence.
Badge: NilbinSec Power Glove Re-release SAO (DEF CON 34)
GitHub / NilbinSec · retrieved 2026-05-15
Primary historical maker-controlled repository for the DC32 Power Glove SAO fabrication/assembly trail. Its public root has no detected explicit licence and does not supply an event-distribution record, 2026 re-release mapping, source code, final 2026 revision, or image reuse grant.
Badge: NilbinSec Power Glove Re-release SAO (DEF CON 34)
NilbinSec public self-submission · retrieved 2026-05-15
Primary current-event maker self-submission naming the Power Glove Re-release as a free SAO, claiming 500 giveaway units, social-media/Badgelife-Village drops, and a planned NilbinSec GitHub post on DEF CON Day 1. It does not prove final production, an actual drop, recipient allocation, component parity, access rights, organizer endorsement, or image reuse permission.
Badge: NilbinSec Power Glove Re-release SAO (DEF CON 34)