Issue dossier
The public tree supplies a KiCad schematic and BOM, but reviewed material does not publish a final assembled-board revision, power-source requirements, voltage/current budget, SAO host supply limits, connector orientation/clearance confirmation, pin-by-pin installation guide, hot-plug/ESD protection analysis, component tolerance/substitution policy, assembly/test process, measured behavior, compliance record, or safe modification procedure.
A linkable camp-impact record with badge context, severity, evidence confidence, and source notes.
Back to issues index
hardware, power, connector, and electrical-safety documentation gap · public schematic/BOM and source but incomplete operating documentation · design inputs visible; practical limits unreported
The dossier links an inspectable design trail without asserting that every source-derived board is electrically compatible, safely assembled, safe to attach, or suitable for unattended modification.
- Badge
- NilbinSec DC34 Main Badge Fuzzer SAO
- Category
- hardware, power, connector, and electrical-safety documentation gap
- Severity
- note
- Confidence
- public schematic/BOM and source but incomplete operating documentation
- Status
- design inputs visible; practical limits unreported
- Timeframe
- current source pass
- Source note
- NilbinSec repository tree, BOM, README, and firmware source.
Evidence
Related Resources
NilbinSec public project repository
Maker-controlled public repository whose description identifies the artifact as a DC34 conference-badge fuzzing SAO. Its root exposes the README, KiCad schematic, BOM CSV, PCB archive, firmware source, and compiled firmware files, but no explicit root licence or release is visible.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO
maker operating documentation
Primary maker documentation for the intended DEF CON 34 main-badge target, the three initial modes, selector/trigger use, potential badge-damage warning, possible convention reflash statement, flashing outline, and claim that Gerbers, schematic, BOM, and firmware are included.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO
public firmware source
Primary C implementation source for the ATtiny1614 target, GPIO stimulation, open-drain wake assertion, passive I²C listener, LED/button mappings, 0x08–0x77 sweep implementation, 0x19/0x3C skip list, UART debug surface, and serialUPDI context. It is source code, not proof of final on-site firmware or a licence grant.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO
public hardware source
Public tree containing DCBadgeFuzzer.kicad_sch, DCBadgeFuzzer.csv, and a PCB archive. The BOM records the ATtiny1614, SAO v1.69bis connector, two switches, four LEDs, 1×3 connector, resistors, and capacitors, but does not establish a final manufactured revision, test evidence, or media-reuse permission.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO
Source trail
Evidence Sources
GitHub / NilbinSec · retrieved 2026-05-15
Primary maker-controlled project source identifying a NilbinSec SAO for the DC34 conference badge and exposing the technical source tree. It does not prove DEF CON organizer issuance, target-badge authorization, a sale or giveaway, production volume, completed handoff, final firmware, or reusable-image rights.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO
GitHub / NilbinSec · retrieved 2026-05-15
Primary maker source for the pre-event main-badge fuzzing purpose, the three documented modes, input/LED behavior, warning that Mode 1 may harm a badge, prospective reflash wording, and build/flash guidance. It presents intended behavior, not a guaranteed or authorized outcome on a final badge.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO
GitHub / NilbinSec · retrieved 2026-05-15
Primary BOM source naming the ATtiny1614-SS, four LEDs, two switches, SAO v1.69bis connector, J1 1×3 connector, 470-ohm resistors, and capacitors. It documents the public design inputs only, not final component substitutions, electrical characterization, production, safety, or a hardware licence.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO
GitHub / NilbinSec · retrieved 2026-05-15
Primary implementation source for the ATtiny1614, GPIO/LED/button mapping, GPIO stimulus/release/sample loop, open-drain wake behavior, passive I²C implementation, 0x08–0x77 sweep, and skip list. It differs from the README's broad 0x00–0x7F description and does not establish a released final binary or explicit licence.
Badge: NilbinSec DC34 Main Badge Fuzzer SAO