lipo
Uberflux identifies `lipo` as the maker for Shitty Kitty V2; the reviewed profile does not provide a fuller personal name or separate design-author attribution.
SourceDEF CON 34 · United States · 2026
Pre-event sold-out RP2040 dual-SAO BadgeLife restock
Uberflux lists Shitty Kitty V2 under the `lipo` maker handle and Uberfoo Heavy Industries, with DEF CON 34 as its only listed drop. At this August 3 source pass, the $75 listing is marked OUT with zero remaining and 15 sold, and says new stock is available for DEF CON 34 pickup. Its maker-published description names dual 0.96-inch color IPS screens, an RP2040 platform, two fully connected 1.69bis SAO ports, USB-C, LiPo power/charging components, five user buttons, a boot button, and SkittyOS features. It also announces new firmware with graphics and puzzles, but provides no release link. This is a documented pre-event restock listing, not proof of final pickup, a completed firmware release, a reproduced engineering archive, or an official DEF CON admission credential.
People
Uberflux identifies `lipo` as the maker for Shitty Kitty V2; the reviewed profile does not provide a fuller personal name or separate design-author attribution.
SourceThe Uberflux profile gives Uberfoo Heavy Industries as the store name for the `lipo` Shitty Kitty V2 listing; it does not establish distinct hardware, firmware, or artwork credits.
SourceIt adds a current independent DEF CON BadgeLife restock with unusually detailed maker-published hardware and operating claims, including two fully connected SAO ports and a specific power-management bill-of-material surface. The record preserves those primary listing claims while separating them from unverified electrical performance, battery safety certification, final firmware availability, production completion, and reusable-image rights.
The maker's listing specifies two 0.96-inch 80x160 color IPS displays; a Raspberry Pi RP2040 dual-core Arm Cortex-M0+ described as running at 200 MHz; 264 kB SRAM; 16 MB Quad SPI flash; two fully connected SAO 1.69bis ports with dedicated GPIO, UART, and I²C connections; five user buttons; a dedicated boot button; USB-C; and a polycarbonate back case. It lists an included 2,000 mAh LiPo, BQ24072RGT battery-management controller, TPS63051RMWR 3.3 V buck-boost supply, thermal monitoring, and up-to-1.5 A fast-charging support. The source does not publish a schematic, BOM, PCB/Gerbers, pinout, board dimensions, actual rail/current measurements, battery cell details, charging test evidence, SAO electrical tests, or safety/certification documentation.
The storefront calls the software SkittyOS and describes dynamic graphics demos, customizable scrolling text, adjustable fonts and international-character support, individual screen configuration/demo modes, and persistent settings stored in flash. It separately says new firmware with new graphics and puzzles will be released. The reviewed product and maker-profile pages provide no firmware source or binary, release URL, flashing procedure beyond the listing's USB mass-storage statement, build instructions, puzzle documentation, protocol specification, or software/hardware/documentation license.
The live listing calls the badge Shitty Kitty V2 and says new stock is available for pickup at DEF CON 34. At the August 3, 2026 source pass it is marked OUT at $75, with zero remaining and 15 sold, and lists DEF CON 34 as its drop option. Those maker-marketplace signals establish a sold-out pre-event offer, not final production, physical handoff, recipient identity, firmware availability, or a convention-wide allocation. It is an independent BadgeLife item rather than the official DEF CON Human badge.
Lifecycle
The listing calls both ports fully connected and 1.69bis-compliant, with dedicated GPIO, UART, and I²C connections per port. It does not publish pinouts, voltage/current limits, board layout, test results, or compatibility evidence for every SAO.
SourceThe maker lists two 0.96-inch 80x160 color IPS screens, an RP2040 dual-core Arm Cortex-M0+ described as running at 200 MHz, 264 kB SRAM, and 16 MB Quad SPI flash. The listing does not publish a board schematic, display part number, clocks, or electrical measurements.
SourceThe listing describes SkittyOS graphics demos, scrolling text, font/character settings, independent screen modes, and flash-persisted settings, and announces future firmware with new graphics and puzzles. No firmware release, source, binary, flashing guide, or license is linked.
SourceThe maker lists an included 2,000 mAh LiPo, BQ24072RGT battery-management controller, TPS63051RMWR 3.3 V buck-boost supply, thermal monitoring, and up-to-1.5 A fast-charging support. The public listing does not include a battery specification, charger settings, measurements, operating guide, or independent safety verification.
SourceOperational history
The record does not convert component names or marketing language into an electrical-safety endorsement, battery-service guide, or safe-modification claim.
The catalogue retains precise maker-published components without treating a storefront specification as a fully reproducible design or universal SAO compatibility guarantee.
The record can describe the maker's announced feature surface without claiming a released, reproducible, inspectable, or reusable firmware archive.
The pre-event record remains source-backed and image-free instead of copying storefront media, social posts, screenshots, placeholders, or generated approximations.
The catalogue records a source-backed sold-out pre-event offer without changing sales counters into a completed fulfillment report.